Jetting MJet V0


Extremely compact jetting machine with electrical operation for cable dimensions between 0.5 – 6 mm and microduct dimensions between 3 – 16mm. No loose small parts, no screws and no tools needed to set up the machine. It takes less than 1 minute to change microduct or cable dimension. MJET V0 can be operated from the carry case which means the set up time is just a few minutes.

SKU: 1151001 Category: Tag:



  • Electric traction drive, supplied from the attached battery
  • Permits jetting in larger tubes with smaller compressor unit, the motor doesn’t consume any air flow
  • Electronic cable protection, if a stop or slip is detected the drive stops within 250 ms.
  • Reduced stress on the cable due to adjustable traction force
  • OLED display shows speed, current progress and cable pushing force.
  • Maximum speed 250 m/s, 60 N pushing force.
  • Made in Sweden

Technical data:

  • 18 Volt standard Metabo Multivolt battery
  • Max press. 16 Bar
  • 0,5-6 mm cable diameter*
  • 3-16 mm duct diameter
  • Weight ~ 2 kgs

Whats included:

  • MJET V0
  • 18V Metabo Battery
  • Battery charger
  • Duct clamp for 5mm
  • Cable guide 0-5mm
  • Cable seal 10pcs of 1.8 and 2.2mm
  • Carry case


Additional information

Weight 12 kg
Dimensions 530 × 460 × 260 cm