Description
Fusion splicing made easy and affordable with the EasySplicer mk2.
- For both Singlemode and Multimode fibers.
- Splicing time of less then 7 seconds.
- Loss estimation.
- Pull test of performed splices.
- Built in oven.
- Easy to use and to carry along.
- SOC holder and connectors available (optional).
The Easysplcer MK-2 kit comes with:
3 pair of fiberholders, heater, battery, carrying-case, cleaver, stripper, power cord and manual.
Splicing method | V-groove (cladding alignment). | |||||||
Fiber Types | SMF, MMF 50/125μm and 62.5/125μm fiber, | |||||||
250μm primary and 900μm secondary coated fiber. | ||||||||
Fiber Handling | Fiber holders, 3 pairs (250, 900 and loose tube). | |||||||
Splice Programs | 3 pre-defined. SMF, MMF, OM1. | |||||||
Typical Splice Loss | 0.03dB SMF, 0.01dB MMF. | |||||||
Altitude Compensation | Automatic up to 4100 meters altitude with compensation for moisture and temperature. | |||||||
Typical Cycle | Time 7s + 35s (splice + oven cycle). | |||||||
Sleeve Dimensions | Max 64mm length, 2-5mm diameter supported by oven. | |||||||
Communication | USB, mini usb plug. | |||||||
Memory Internal | 1MB, External SD-Card. | |||||||
Display | LCD, color, 2.8 , 320×240 pixels. | |||||||
Oven Ceramic/teflon-type. | 40mm sleeves in about 35 sec. | |||||||
Magnification Camera | 140x. | |||||||
Operating Environment | 0-40°C, max 95% RH, non-condensing. | |||||||
Size | 230x98x53mm. | |||||||
Weight | 800g. | |||||||
Power Sources | External power supply, 6V, 1.5A, 100-240VAC 50-60Hz, Built in 3400mAh Li-Ion battery pack. | |||||||
Splicing Capacity | 60 splice + oven cycles. | |||||||
Additional Features | Loss estimation, Fiber fault detection, SD-card for logging etc. |